Hightower LT CC
frame starting at £2,999.00
Upgradesloaded from ajax from build kit selection.
- 148mm Rear Axle Spacing
- 150mm (6") VPP™ suspension
- 15mm thru-axle fork
- 29" wheels
- Bottle cage mount within front triangle fits piggyback shocks
- Double sealed pivots for long bearing life
- Integrated Headset (IS41; IS52)
- Internal carbon tubes ensure precise and hassle-free routing of derailleur and seat post cables
- ISCG-05 tabs for chainguide compatibility
- Sizes: S, M, L, XL, XXL
- Threaded Bottom Bracket
- Required Hope Headset Model: Hope 7 J
0% APR Finance Options
Built for big days in big terrain.
Hightower LT is designed for maximum speed in the biggest mountains. It’s truly race-bred, its design the result of the demands of racing at the EWS, Crankworx, and Andes Pacifico.
Midway through 2016, Mark Scott came to us with a request to eke more travel out of the bike. The stock 135mm wasn’t quite enough to maintain his speed on some of the rougher tracks. Our engineering team designed a new set of links that pushed travel to 146mm at the expense of some compatibility, but because Mark’s setup was a known variable, we could be very precise. We machined two sets on site, gave one to Mark, and the other to Iago Garay, a racer much more likely to take the fun line than tuck for speed.
The links went through a few iterations to find a balance of spring rate, travel, and shock compatibility. Toward the end of 2016, it became apparent that the best way to get the performance and travel required was to design a new swingarm to pair with the links, like we did with the V10. At this point the bike got a name—Hightower LT—and we pushed the travel to a full 150mm.
Starting from the Enduro World Series in Wicklow, the Santa Cruz | SRAM team have been racing on Wicklow Green production bikes—savvy internet commenters noticed the post-mount rear brake straightaway, and it's also been seen under the elusive Ratboy at Peaty's Steel City DH, Crankworx, and Megavalanche.
Measured with a fork with a 561mm axle-to-crown measurement.
|Head Tube Angle||66.4°||66.4°||66.4°||66.4°||66.4°|
|Head Tube Length||90mm||95mm||100mm||110mm||130mm|
|Seat Tube Angle||73.7°||73.7°||73.7°||73.7°||73.7°|
|Seat Tube Length||390mm||420mm||450mm||490mm||510mm|
|Top Tube Length||577mm||605mm||626mm||653mm||692mm|